+++ title = "Configuration" insert_anchor_links = "right" description = "Describes the configuration file and shows all default settings." weight = 40 [extra] mktoc = true +++ Docspell's executables (restserver and joex) can take one argument – a configuration file. If that is not given, the defaults are used, overriden by environment variables. A config file overrides default values, so only values that differ from the defaults are necessary. The complete default options and their documentation is at the end of this page. Besides the config file, another way is to provide individual settings via key-value pairs to the executable by the `-D` option. For example to override only `base-url` you could add the argument `-Ddocspell.server.base-url=…` to the command. Multiple options are possible. For more than few values this is very tedious, obviously, so the recommended way is to maintain a config file. If these options *and* a file is provded, then any setting given via the `-D…` option overrides the same setting from the config file. At last, it is possible to configure docspell via environment variables if there is no config file supplied (if a config file *is* supplied, it is always preferred). Note that this approach is limited, as arrays are not supported. A list of environment variables can be found at the [end of this page](#environment-variables). The environment variable name follows the corresponding config key - where dots are replaced by underscores and dashes are replaced by two underscores. For example, the config key `docspell.server.app-name` can be defined as env variable `DOCSPELL_SERVER_APP__NAME`. It is also possible to specify environment variables inside a config file (to get a mix of both) - please see the [documentation of the config library](https://github.com/lightbend/config#standard-behavior) for more on this. # File Format The format of the configuration files can be [HOCON](https://github.com/lightbend/config/blob/master/HOCON.md#hocon-human-optimized-config-object-notation), JSON or what this [config library](https://github.com/lightbend/config) understands. The default values below are in HOCON format, which is recommended, since it allows comments and has some [advanced features](https://github.com/lightbend/config#features-of-hocon). Please also see their documentation for more details. A short description (please check the links for better understanding): The config consists of key-value pairs and can be written in a JSON-like format (called HOCON). Keys are organized in trees, and a key defines a full path into the tree. There are two ways: ``` a.b.c.d=15 ``` or ``` a { b { c { d = 15 } } } ``` Both are exactly the same and these forms are both used at the same time. Usually the braces approach is used to group some more settings, for better readability. Strings that contain "not-so-common" characters should be enclosed in quotes. It is possible to define values at the top of the file and reuse them on different locations via the `${full.path.to.key}` syntax. When using these variables, they *must not* be enclosed in quotes. # Important Config Options The configuration of both components uses separate namespaces. The configuration for the REST server is below `docspell.server`, while the one for joex is below `docspell.joex`. You can therefore use two separate config files or one single file containing both namespaces. ## JDBC This configures the connection to the database. This has to be specified for the rest server and joex. By default, a H2 database in the current `/tmp` directory is configured. The config looks like this (both components): ``` bash docspell.joex.jdbc { url = ... user = ... password = ... } docspell.server.backend.jdbc { url = ... user = ... password = ... } ``` The `url` is the connection to the database. It must start with `jdbc`, followed by name of the database. The rest is specific to the database used: it is either a path to a file for H2 or a host/database url for MariaDB and PostgreSQL. When using H2, the user and password can be chosen freely on first start, but must stay the same on subsequent starts. Usually, the user is `sa` and the password is left empty. Additionally, the url must include these options: ``` ;MODE=PostgreSQL;DATABASE_TO_LOWER=TRUE;AUTO_SERVER=TRUE ``` ### Examples PostgreSQL: ``` url = "jdbc:postgresql://localhost:5432/docspelldb" ``` MariaDB: ``` url = "jdbc:mariadb://localhost:3306/docspelldb" ``` H2 ``` url = "jdbc:h2:///path/to/a/file.db;MODE=PostgreSQL;DATABASE_TO_LOWER=TRUE;AUTO_SERVER=TRUE" ``` ## Admin Endpoint The admin endpoint defines some [routes](@/docs/api/intro.md#admin) for adminstration tasks. This is disabled by default and can be enabled by providing a secret: ``` bash ... admin-endpoint { secret = "123" } ``` This secret must be provided to all requests to a `/api/v1/admin/` endpoint. ## Full-Text Search: SOLR [Apache SOLR](https://solr.apache.org) is used to provide the full-text search. Both docspell components must provide the same connection setup. This is defined in the `full-text-search.solr` subsection: ``` bash ... full-text-search { enabled = true ... solr = { url = "http://localhost:8983/solr/docspell" } } ``` The default configuration at the end of this page contains more information about each setting. The `solr.url` is the mandatory setting that you need to change to point to your SOLR instance. Then you need to set the `enabled` flag to `true`. When installing docspell manually, just install solr and create a core as described in the [solr documentation](https://solr.apache.org/guide/8_4/installing-solr.html). That will provide you with the connection url (the last part is the core name). If Docspell detects an empty core it will run a schema setup on start automatically. The `full-text-search.solr` options are the same for joex and the restserver. There is an [admin route](@/docs/api/intro.md#admin) that allows to re-create the entire index (for all collectives). This is possible via a call: ``` bash $ curl -XPOST -H "Docspell-Admin-Secret: test123" http://localhost:7880/api/v1/admin/fts/reIndexAll ``` Here the `test123` is the key defined with `admin-endpoint.secret`. If it is empty (the default), this call is disabled (all admin routes). Otherwise, the POST request will submit a system task that is executed by a joex instance eventually. Using this endpoint, the entire index (including the schema) will be re-created. This is sometimes necessary, for example if you upgrade SOLR or delete the core to provide a new one (see [here](https://solr.apache.org/guide/8_4/reindexing.html) for details). Another way is to restart docspell (while clearing the index). If docspell detects an empty index at startup, it will submit a task to build the index automatically. Note that a collective can also re-index their data using a similiar endpoint; but this is only deleting their data and doesn't do a full re-index. The solr index doesn't contain any new information, it can be regenerated any time using the above REST call. Thus it doesn't need to be backed up. ## Bind The host and port the http server binds to. This applies to both components. The joex component also exposes a small REST api to inspect its state and notify the scheduler. ``` bash docspell.server.bind { address = localhost port = 7880 } docspell.joex.bind { address = localhost port = 7878 } ``` By default, it binds to `localhost` and some predefined port. This must be changed, if components are on different machines. ## Baseurl The base url is an important setting that defines the http URL where the corresponding component can be reached. It applies to both components. For a joex component, the url must be resolvable from a REST server component. The REST server also uses this url to create absolute urls and to configure the authenication cookie. By default it is build using the information from the `bind` setting, which is `http://localhost:7880`. If the default is not changed, docspell will use the request to determine the base-url. It first inspects the `X-Forwarded-For` header that is often used with reverse proxies. If that is not present, the `Host` header of the request is used. However, if the `base-url` setting is changed, then only this setting is used. ``` docspell.server.base-url = ... docspell.joex.base-url = ... ``` If you are unsure, leave it at its default. ### Examples ``` docspell.server.baseurl = "https://docspell.example.com" docspell.joex.baseurl = "http://192.168.101.10" ``` ## App-id The `app-id` is the identifier of the corresponding instance. It *must be unique* for all instances. By default the REST server uses `rest1` and joex `joex1`. It is recommended to overwrite this setting to have an explicit and stable identifier should multiple instances are intended. ``` bash docspell.server.app-id = "rest1" docspell.joex.app-id = "joex1" ``` ## Registration Options This defines if and how new users can create accounts. There are 3 options: - *closed* no new user can sign up - *open* new users can sign up - *invite* new users can sign up but require an invitation key This applies only to the REST sevrer component. ``` bash docspell.server.backend.signup { mode = "open" # If mode == 'invite', a password must be provided to generate # invitation keys. It must not be empty. new-invite-password = "" # If mode == 'invite', this is the period an invitation token is # considered valid. invite-time = "3 days" } ``` The mode `invite` is intended to open the application only to some users. The admin can create these invitation keys and distribute them to the desired people. For this, the `new-invite-password` must be given. The idea is that only the person who installs docspell knows this. If it is not set, then invitation won't work. New invitation keys can be generated from within the web application or via REST calls (using `curl`, for example). ``` bash curl -X POST -d '{"password":"blabla"}' "http://localhost:7880/api/v1/open/signup/newinvite" ``` ## Authentication Authentication works in two ways: - with an account-name / password pair - with an authentication token The initial authentication must occur with an accountname/password pair. This will generate an authentication token which is valid for a some time. Subsequent calls to secured routes can use this token. The token can be given as a normal http header or via a cookie header. These settings apply only to the REST server. ``` bash docspell.server.auth { server-secret = "hex:caffee" # or "b64:Y2FmZmVlCg==" session-valid = "5 minutes" } ``` The `server-secret` is used to sign the token. If multiple REST servers are deployed, all must share the same server secret. Otherwise tokens from one instance are not valid on another instance. The secret can be given as Base64 encoded string or in hex form. Use the prefix `hex:` and `b64:`, respectively. If no prefix is given, the UTF8 bytes of the string are used. The `session-valid` determines how long a token is valid. This can be just some minutes, the web application obtains new ones periodically. So a rather short time is recommended. ## OpenID Connect / OAuth2 You can integrate Docspell into your SSO solution via [OpenID Connect](https://openid.net/connect/) (OIDC). This requires to set up an OpenID Provider (OP) somewhere and to configure Docspell accordingly to act as the relying party. You can define multiple OPs to use. For some examples, please see the default configuration file [below](#rest-server). The configuration of a provider highly depends on how it is setup. Here is an example for a setup using [keycloak](https://www.keycloak.org): ``` conf provider = { provider-id = "keycloak", client-id = "docspell", client-secret = "example-secret-439e-bf06-911e4cdd56a6", scope = "profile", # scope is required for OIDC authorize-url = "http://localhost:8080/auth/realms/home/protocol/openid-connect/auth", token-url = "http://localhost:8080/auth/realms/home/protocol/openid-connect/token", #User URL is not used when signature key is set. #user-url = "http://localhost:8080/auth/realms/home/protocol/openid-connect/userinfo", sign-key = "b64:MII…ZYL09vAwLn8EAcSkCAwEAAQ==", sig-algo = "RS512" } ``` The `provider-id` is some identifier that is used in the URL to distinguish between possibly multiple providers. The `client-id` and `client-secret` define the two parameters required for a "confidential client". The different URLs are best explained at the [keycloak docs](https://www.keycloak.org/docs/latest/server_admin/#_oidc-endpoints). They are available for all OPs in some way. The `user-url` is not required, if the access token is already containing the necessary data. If not, then docspell performs another request to the `user-url`, which must be the user-info endpoint, to obtain the required user data. If the data is taken from the token directly and not via a request to the user-info endpoint, then the token must be validated using the given `sign-key` and `sig-algo`. These two values are then required to specify! However, if the user-info endpoint should be used, then leave the `sign-key` empty and specify the correct url in `user-url`. When specifying the `sign-key` use a prefix of `b64:` if it is Base64 encoded or `hex:` if it is hex encoded. Otherwise the unicode bytes are used, which is most probably not wanted for this setting. Once the user is authenticated, docspell tries to setup an account and does some checks. For this it must get to the username and collective name somehow. How it does this, can be specified by the `user-key` and `collective-key` settings: ``` conf # The collective of the user is given in the access token as # property `docspell_collective`. collective-key = "lookup:docspell_collective", # The username to use for the docspell account user-key = "preferred_username" ``` The `user-key` is some string that is used to search the JSON response from the OP for an object with that key. The search happens recursively, so the field can be in a nested object. The found value is used as the user name. Keycloak transmits the `preferred_username` when asking for the `profile` scope. This can be used as the user name. The collective name can be obtained by different ways. For example, you can instruct your OP (like keycloak) to provide a collective name in the token and/or user-info responses. If you do this, then use the `lookup:` prefix as in the example above. This instructs docspell to search for a value the same way as the `user-key`. You can also set a fixed collective, using `fixed:` prefix; in this case all users are in the same collective! A third option is to prefix it with `account:` - then the value that is looked up is interpreted as the full account name, like `collective/user` and the `user-key` setting is ignored. If you want to put each user in its own collective, you can just use the same value as in `user-key`, only prefixed with `lookup:`. In the example it would be `lookup:preferred_username`. If you find that these methods do not suffice for your case, please open an issue. ## File Processing Files are being processed by the joex component. So all the respective configuration is in this config only. File processing involves several stages, detailed information can be found [here](@/docs/joex/file-processing.md#text-analysis) and in the corresponding sections in [joex default config](#joex). Configuration allows to define the external tools and set some limitations to control memory usage. The sections are: - `docspell.joex.extraction` - `docspell.joex.text-analysis` - `docspell.joex.convert` Options to external commands can use variables that are replaced by values at runtime. Variables are enclosed in double braces `{{…}}`. Please see the default configuration for what variables exist per command. ### Classification In `text-analysis.classification` you can define how many documents at most should be used for learning. The default settings should work well for most cases. However, it always depends on the amount of data and the machine that runs joex. For example, by default the documents to learn from are limited to 600 (`classification.item-count`) and every text is cut after 5000 characters (`text-analysis.max-length`). This is fine if *most* of your documents are small and only a few are near 5000 characters). But if *all* your documents are very large, you probably need to either assign more heap memory or go down with the limits. Classification can be disabled, too, for when it's not needed. ### NLP This setting defines which NLP mode to use. It defaults to `full`, which requires more memory for certain languages (with the advantage of better results). Other values are `basic`, `regexonly` and `disabled`. The modes `full` and `basic` use pre-defined lanugage models for procesing documents of languaes German, English and French. These require some amount of memory (see below). The mode `basic` is like the "light" variant to `full`. It doesn't use all NLP features, which makes memory consumption much lower, but comes with the compromise of less accurate results. The mode `regexonly` doesn't use pre-defined lanuage models, even if available. It checks your address book against a document to find metadata. That means, it is language independent. Also, when using `full` or `basic` with lanugages where no pre-defined models exist, it will degrade to `regexonly` for these. The mode `disabled` skips NLP processing completely. This has least impact in memory consumption, obviously, but then only the classifier is used to find metadata (unless it is disabled, too). You might want to try different modes and see what combination suits best your usage pattern and machine running joex. If a powerful machine is used, simply leave the defaults. When running on an raspberry pi, for example, you might need to adjust things. ### Memory Usage The memory requirements for the joex component depends on the document language and the enabled features for text-analysis. The `nlp.mode` setting has significant impact, especially when your documents are in German. Here are some rough numbers on jvm heap usage (the same file was used for all tries):
nlp.modeEnglishGermanFrench
full420M950M490M
basic170M380M390M
Note that these are only rough numbers and they show the maximum used heap memory while processing a file. When using `mode=full`, a heap setting of at least `-Xmx1400M` is recommended. For `mode=basic` a heap setting of at least `-Xmx500M` is recommended. Other languages can't use these two modes, and so don't require this amount of memory (but don't have as good results). Then you can go with less heap. For these languages, the nlp mode is the same as `regexonly`. Training the classifier is also memory intensive, which solely depends on the size and number of documents that are being trained. However, training the classifier is done periodically and can happen maybe every two weeks. When classifying new documents, memory requirements are lower, since the model already exists. More details about these modes can be found [here](@/docs/joex/file-processing.md#text-analysis). The restserver component is very lightweight, here you can use defaults. # JVM Options The start scripts support some options to configure the JVM. One often used setting is the maximum heap size of the JVM. By default, java determines it based on properties of the current machine. You can specify it by given java startup options to the command: ``` $ ./docspell-restserver*/bin/docspell-restserver -J-Xmx1G -- /path/to/server-config.conf ``` This would limit the maximum heap to 1GB. The double slash separates internal options and the arguments to the program. Another frequently used option is to change the default temp directory. Usually it is `/tmp`, but it may be desired to have a dedicated temp directory, which can be configured: ``` $ ./docspell-restserver*/bin/docspell-restserver -J-Xmx1G -Djava.io.tmpdir=/path/to/othertemp -- /path/to/server-config.conf ``` The command: ``` $ ./docspell-restserver*/bin/docspell-restserver -h ``` gives an overview of supported options. It is recommended to run joex with the G1GC enabled. If you use java8, you need to add an option to use G1GC (`-XX:+UseG1GC`), for java11 this is not necessary (but doesn't hurt either). This could look like this: ``` ./docspell-joex-{{version()}}/bin/docspell-joex -J-Xmx1596M -J-XX:+UseG1GC -- /path/to/joex.conf ``` Using these options you can define how much memory the JVM process is able to use. This might be necessary to adopt depending on the usage scenario and configured text analysis features. Please have a look at the corresponding [section](@/docs/configure/_index.md#memory-usage). # Logging By default, docspell logs to stdout. This works well, when managed by systemd or other inits. Logging is done by [logback](https://logback.qos.ch/). Please refer to its documentation for how to configure logging. If you created your logback config file, it can be added as argument to the executable using this syntax: ``` bash /path/to/docspell -Dlogback.configurationFile=/path/to/your/logging-config-file ``` To get started, the default config looks like this: ``` xml true [%thread] %highlight(%-5level) %cyan(%logger{15}) - %msg %n ``` The `` means, that only log statements with level "INFO" will be printed. But the `` above says, that for loggers with name "docspell" statements with level "DEBUG" will be printed, too. # Default Config ## Rest Server {{ incl_conf(path="templates/shortcodes/server.conf") }} ## Joex {{ incl_conf(path="templates/shortcodes/joex.conf") }} ## Environment Variables Environment variables can be used when there is no config file supplied. The listing below shows all possible variables and their default values. {{ incl_conf(path="templates/shortcodes/config.env.txt") }}