docspell/website/site/content/docs/joex/file-processing.md

+++ title = "File Processing" description = "How Docspell processes files." weight = 20 insert_anchor_links = "right" [extra] mktoc = true +++

When uploading a file, it is only saved to the database together with the given meta information. The file is not visible in the ui yet. Then joex takes the next such file (or files in case you uploaded many) and starts processing it. When processing finished, it the item and its files will show up in the ui.

If an error occurs during processing, the item will be created anyways, so you can see it. Depending on the error, some information may not be available.

Processing files may require some resources, like memory and cpu. Many things can be configured in the config file to adapt it to the machine it is running on.

Important is the setting docspell.joex.scheduler.pool-size which defines how many tasks can run in parallel on the machine running joex. For machines that are not very strong, choosing a 1 is recommended.

Stages

DuplicateCheck ->
Extract Archives ->
Conversion to PDF ->
Text Extraction ->
Generate Previews ->
Text Analysis

These steps are executed sequentially. There are many config options available for each step.

External Commands

External programs are all configured the same way. You can change the command (add, remove options etc) in the config file. As an example, here is the wkhtmltopdf command that is used to convert html files to pdf:

docspell.joex.convert {
  wkhtmlpdf {
    command = {
      program = "wkhtmltopdf"
      args = [
        "-s",
        "A4",
        "--encoding",
        "{{encoding}}",
        "--load-error-handling", "ignore",
        "--load-media-error-handling", "ignore",
        "-",
        "{{outfile}}"
      ]
      timeout = "2 minutes"
    }
    working-dir = ${java.io.tmpdir}"/docspell-convert"
  }
}

Strings in {{…}} are replaced by docspell with the appropriate values at runtime. However, based on your use case you can just set constant values or add other options. This might be necessary when there are different version installed where changes in the command line are required. As you see for wkhtmltopdf the page size is fixed to DIN A4. Other commands are configured like this as well.

For the default values, please see the configuration page.

Duplicate Check

If specified, the uploaded file is checked via a sha256 hash, if it has been uploaded before. If so, it is removed from the set of uploaded files. You can define this with the upload metadata.

If this results in an empty set, the processing ends.

Extract Archives

If a file is a zip or eml (e-mail) file, it is extracted and its entries are added to the file set. The original (archive) file is kept in the database, but removed from further processing.

Conversion to PDF

All files are converted to a PDF file. How this is done depends on the file type. External programs are required, which must be installed on the machine running joex. The config file allows to specify the exact commands used.

See the section docspell.joex.convert in the config file.

The following config options apply to the conversion as a whole:

docspell.joex.convert {
  converted-filename-part = "converted"
  max-image-size = ${docspell.joex.extraction.ocr.max-image-size}
}

The first setting defines a suffix that is appended to the original file name to name the converted file. You can set an empty string to keep the same filename as the original. The extension is always changed to .pdf, of course.

The second option defines a limit for reading images. Some images may be small as a file but uncompressed very large. To avoid allocating too much memory, there is a limit. It defaults to 14mp.

Html

Html files are converted with the external tool wkhtmltopdf. It produces quite nice results by using the webkit rendering engine. So the resulting PDF looks just like in a browser.

Images

Images are converted using tesseract.

This might be interesting, if you want to try a different language that is not available in docspell's settings yet. Tesseract also adds the extracted text as a separate layer to the PDF.

For images, tesseract is configured to create a text and a pdf file.

Text

Plaintext files are treated as markdown. You can modify the results by providing some custom css.

The resulting HTML files are then converted to PDF via wkhtmltopdf as described above.

Office

To convert office files, Libreoffice is required and used via the command line tool unoconv.

To improve performance, it is recommended to start a libreoffice listener by running unoconv -l in a separate process.

PDF

PDFs can be converted into PDFs, which may sound silly at first. But PDFs come in many different flavors and may not contain a separate text layer, making it impossible to "copy & paste" text in them. So you can optionally use the tool ocrmypdf to create a PDF/A type PDF file containing a text layer with the extracted text.

It is recommended to install ocrympdf, but it also is optional. If it is enabled but fails, the error is not fatal and the processing will continue using the original pdf for extracting text. You can also disable it to remove the errors from the processing logs.

The --skip-text option is necessary to not fail on "text" pdfs (where ocr is not necessary). In this case, the pdf will be converted to PDF/A.

Text Extraction

Text extraction also depends on the file type. Some tools from the convert section are used here, too.

Text is tried to extract from the original file. If that can't be done or results in an error, the converted file is tried next.

Html

Html files are not used directly, but the converted PDF file is used to extract the text. This makes sure that the text is extracted you actually see. The conversion is done anyways and the resulting PDF already has a text layer.

Images

For images, tesseract is used again. In most cases this step is not executed, because the text has already been extracted in the conversion step. But if the conversion would have failed for some reason, tesseract is called here (with different options).

Text

This is obviously trivial :)

Office

MS Office files are processed using a library without any external tool. It uses apache poi which is well known for these tasks.

A rich text file (.rtf) is procssed by Java "natively" (using their standard library).

OpenDocument files are proecessed using the ODS/ODT/ODF parser from tika.

PDF

PDF files are first checked for a text layer. If this returns some text that is greater than the configured minimum length, it is used. Otherwise, OCR is started for the whole pdf file page by page.

docspell.joex {
  extraction {
    pdf {
      min-text-len = 500
    }
  }
}

After OCR both texts are compared and the longer is used. Since PDFs can contain text and images, it might be safer to always do OCR, but this is something to choose by the user.

PDF ocr is comprised of multiple steps. At first only the first page-range pages are extracted to avoid too long running tasks (someone submit an ebook for example). But you can disable this limit by setting a -1. After all, text that is not extracted, won't be indexed either and is therefore not searchable. It depends on your machine/setup.

Another limit is max-image-size which defines the size of an image in pixel (width * height) where processing is skipped.

Then ghostscript is used to extract single pages into image files and unpaper is used to optimize the images for ocr. Unpaper is optional, if it is not found, it is skipped, which may be a compromise on slow machines.

docspell.joex {
  extraction {
    ocr {
      max-image-size = 14000000
      page-range {
        begin = 10
      }
      ghostscript {
        command {
          program = "gs"
          args = [ "-dNOPAUSE"
                 , "-dBATCH"
                 , "-dSAFER"
                 , "-sDEVICE=tiffscaled8"
                 , "-sOutputFile={{outfile}}"
                 , "{{infile}}"
                 ]
          timeout = "5 minutes"
        }
        working-dir = ${java.io.tmpdir}"/docspell-extraction"
      }
      unpaper {
        command {
          program = "unpaper"
          args = [ "{{infile}}", "{{outfile}}" ]
          timeout = "5 minutes"
        }
      }
      tesseract {
        command {
          program = "tesseract"
          args = ["{{file}}"
                 , "stdout"
                 , "-l"
                 , "{{lang}}"
                 ]
          timeout = "5 minutes"
        }
      }
    }
  }
}

Generating Previews

Previews are generated from the converted PDF of every file. The first page of each file is converted into an image file. The config file allows to specify a dpi which is used to render the pdf page. The default is set to 32dpi, which results roughly in a 200x300px image. For comparison, a standard A4 is usually rendered at 96dpi, which results in a 790x1100px image.

docspell.joex {
  extraction {
    preview {
      dpi = 32
    }
  }
}

{% infobubble(mode="warning", title="Please note") %}

When this is changed, you must re-generate all preview images. Check the api for this, there is an endpoint to regenerate all preview images for a collective. There is also a bash script provided in the tools/ directory that can be used to call this endpoint.

{% end %}

Text Analysis

This uses the extracted text to find what could be attached to the new item. There are multiple things provided.

Classification

If you enabled classification in the config file, a model is trained periodically from your files. This is now used to guess a tag for the item.

Natural Language Processing

NLP is used to find out which terms in the text may be a company or person that is later used to find metadata to attach to. It also uses your address book to match terms in the text.

This requires to load language model files in memory, which is quite a lot. Also, the number of languages is much more restricted than for tesseract. Currently English, German and French are supported.

Another feature that is planned, but not yet provided is to propose new companies/people you don't have yet in your address book.

The config file allows some settings. You can specify a limit for texts. Large texts result in higher memory consumption. By default, the first 10'000 characters are taken into account.

The setting clear-stanford-nlp-interval allows to define an idle time after which the model files are cleared from memory. This allows to be reclaimed by the OS. The timer starts after the last file has been processed. If you can afford it, it is recommended to disable it by setting it to 0.